Volume 41 Issue 6
Dec.  2023
Turn off MathJax
Article Contents
WANG Jiaxin, ZHANG Hanchen, WU Zhiqiang, LIU Yuqing, CHEN Zaigang. A Suspension Stiffness Optimization for Driving System in High-speed Train with the Built-in Axle Box Based on Orthogonal Test[J]. Journal of Transport Information and Safety, 2023, 41(6): 12-19. doi: 10.3963/j.jssn.1674-4861.2023.06.002
Citation: WANG Jiaxin, ZHANG Hanchen, WU Zhiqiang, LIU Yuqing, CHEN Zaigang. A Suspension Stiffness Optimization for Driving System in High-speed Train with the Built-in Axle Box Based on Orthogonal Test[J]. Journal of Transport Information and Safety, 2023, 41(6): 12-19. doi: 10.3963/j.jssn.1674-4861.2023.06.002

A Suspension Stiffness Optimization for Driving System in High-speed Train with the Built-in Axle Box Based on Orthogonal Test

doi: 10.3963/j.jssn.1674-4861.2023.06.002
  • Received Date: 2023-03-29
    Available Online: 2024-04-03
  • As the core subsystem of the power bogie of high-speed trains, the drive system is an important guarantee for the safe operation of high-speed trains. However, with the continuous increase in operating speed, the reliable and safe operation of high-speed trains is seriously challenged. To reduce the dynamic loads on the suspension nodes of the axle box built-in high-speed dynamic vehicle driving system and to reduce the vibration level of the key components of the driving system, this paper carries out an optimization study on the suspension stiffness of the driving system. To reduce the dynamic loads and the vibration levels of components in the driving system, an optimization analysis of the suspension stiffness is performed in this study. Based on the multi-body system dynamics theory, the axle box built-in high-speed locomotive dynamics model is established by comprehensively considering the effects of track random uneven excitation, traction power transmission and gear meshing. Using the orthogonal test design method, with the optimization objective of reducing the suspension load at the traction motor lifting point and the vertical load at the axle articulation point of the gearbox, the influence of the suspension stiffness of the traction motor lifting point, the gearbox boom lifting point, and the motor-gearbox connection point on the vibration acceleration of the key components of the vehicle and the dynamic load at the suspension nodes of the driving system are investigated. The influence law is also analyzed by using the extreme difference analysis method to obtain the optimal matching combination of the suspension stiffness of the driving system. The results show that the maximum longitudinal, lateral, and vertical suspension loads of the motor with optimized parameters are reduced by 22.3%, 37.9%, and 9.8%, respectively. Meanwhile, the vertical load between the gearbox and wheel axle is reduced by 9.1%. The lateral vibration accelerations of the motor, gearbox, and axle box are significantly reduced.

     

  • loading
  • [1]
    刘禹清, 陈再刚, 閤鑫, 等. 复杂机车振动环境下牵引电机轴承服役寿命评估[J]. 力学学报, 2022, 54(7): 1820-1829. https://www.cnki.com.cn/Article/CJFDTOTAL-LXXB202207006.htm

    LIU Y Q, CHEN Z G, GE X, et al. Service life evaluation of traction motor bearings in complicated vibration environment of a locomotive[J]. Chinese Journal of Theoretical and Applied Mechanics, 2022, 54(7): 1820-1829. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-LXXB202207006.htm
    [2]
    LATA M. The modern wheelset drive system and possibilities of modelling the torsion dynamics[J]. Transport, 2008, 23(2): 172-181. doi: 10.3846/1648-4142.2008.23.172-181
    [3]
    ALFI S, MAZZOLA L, BRUNI S. Effect of motor connection on the critical speed of high-speed railway vehicles[J]. Vehicle System Dynamics, 2008, 46(S1): 201-214.
    [4]
    HUANG C H, ZENG J, LIANG S L. Influence of system parameters on the stability limit of the undisturbed motion of a motor bogie[J]. Journal of Rail and Rapid Transit, 2014, 228(5): 522-534. doi: 10.1177/0954409713488099
    [5]
    徐坤, 曾京, 黄彩虹, 等. 高速动车电机架悬参数对转向架动力学性能影响研究[J]. 振动与冲击, 2018, 37(20): 95-100, 108. https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201820015.htm

    XU K, ZENG J, HUANG C H, et al. The influence of motor elastic bogie-suspended parameters of high-speed vehicles on the dynamic performance of bogies[J]. Journal of Vibration and Shock, 2018, 37(20): 95-100, 108. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201820015.htm
    [6]
    罗赟, 陈康, 金鼎昌. 270 km·h-1动力车驱动制动单元悬挂参数的优化[J]. 中国铁道科学, 2004, 25(2): 62-66. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGTK200402013.htm

    LUO Y, CHEN K, JIN D C. Optimization of suspension parameters of brake-unit driven by 270 km·h-1 power unit[J]. China Railway Science, 2004, 25(2): 62-66. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGTK200402013.htm
    [7]
    罗赟, 孙永鹏, 张红军, 等. 架悬C0-C0轴式机车电机布置及悬挂的研究[J]. 铁道学报, 2006, 28(6): 41-45. https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB200606007.htm

    LUO Y, SUN Y P, ZHANG H J, et al. Research on the motor arrangement and suspension of the six-axles locomotive with driving equipment mounted in the frame[J]. Journal of the China Railway Society, 2006, 28(6): 41-45. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB200606007.htm
    [8]
    罗赟, 金鼎昌. 架悬机车驱动装置悬挂参数规律的研究[J]. 中国铁道科学, 2007, 28(4): 78-82. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGTK200704019.htm

    LUO Y, JIN D C. Research on the rules of suspension parameters to driving equipments suspended in bogie frames[J]. China Railway Science, 2007, 28(4): 78-82. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZGTK200704019.htm
    [9]
    YAO Y, ZHANG H J, LUO S H. The mechanism of drive system flexible suspension and its application in locomotives[J]. Transport, 2015, 30(1): 69-79.
    [10]
    YAO Y, ZHAO S Y, XIAO F X, et al. The effects of wheelset driving system suspension parameters on the re-adhesion performance of locomotives[J]. Vehicle System Dynamics, 2015, 53(12): 1935-1951. doi: 10.1080/00423114.2015.1108446
    [11]
    缪炳荣, 张卫华, 池茂儒, 等. 下一代高速列车关键技术特征分析及展望[J]. 铁道学报, 2019, 41(3): 58-70. https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB201903009.htm

    MIAO B R, ZHANG W H, CHI M R, et al. Analysis and prospects of key technical features of next generation high speed trains[J]. Journal of the China Railway Society, 2019, 41(3): 58-70. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDXB201903009.htm
    [12]
    贾洪龙, 尹振坤, 梁云, 等. 轨道车辆轴箱内置式转向架技术发展研究[J]. 城市轨道交通研究, 2021, 24(9): 59-63. https://www.cnki.com.cn/Article/CJFDTOTAL-GDJT202109015.htm

    JIA H L, YIN Z K, LIANG Y, et al. Research on development of railway vehicle axle box in-board bogie technology[J]. Urban Mass Transit, 2021, 24(9): 59-63. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-GDJT202109015.htm
    [13]
    张隶新. 轴箱内置和外置高速转向架的动力学性能对比[J]. 铁道科学与工程学报, 2021, 18(3): 581-587. https://www.cnki.com.cn/Article/CJFDTOTAL-CSTD202103004.htm

    ZHANG L X. Dynamics analysis of high-speed railway bogies with inner bearing and outer bearing suspensions[J]. Journal of Railway Science and Engineering, 2021, 18(3): 581-587. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-CSTD202103004.htm
    [14]
    WU B W, CHEN G X, LYU J Z, et al. Effect of the axlebox arrangement of the bogie and the primary suspension parameters on the rail corrugation at the sharp curve metro track[J]. Wear, 2019, 426: 1828-1836. http://www.nstl.gov.cn/paper_detail.html?id=32b5781220d206bd0d1db81c0bf6f0d9
    [15]
    方凌昊, 关庆华, 温泽峰. 轴箱内、外置车辆轮轴弯曲对轮轨接触的影响[J]. 中南大学学报(自然科学版), 2022, 53 (8): 3259-3269. https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD202208040.htm

    FANG L H, GUAN Q H, WEN Z F. Influence of wheelset bending on wheel-rail contact of vehicles with inside and outside axle boxes[J]. Journal of Central South University(Science and Technology), 2022, 53(8): 3259-3269. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD202208040.htm
    [16]
    郭峰, 刘建新, 吴圣川, 等. 轴箱布置方式对高速列车车轴承载性能的影响[J]. 机车电传动, 2022(1): 1-7. https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC202201001.htm

    GUO F, LIU J X, WU S C, et al. Effect of journal arrangement on load-bearing capacity of high-speed train axles[J]. Electric Drive for Locomotives, 2022(1): 1-7. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JCDC202201001.htm
    [17]
    姜立标, 侯文超, 谷方德. 基于正交试验的汽车稳态回转性能仿真[J]. 北京航空航天大学学报, 2011, 37(8): 968-972. https://www.cnki.com.cn/Article/CJFDTOTAL-BJHK201108012.htm

    JIANG L B, HOU W C, GU F D. Steady state circular performance simulation of automobile based on orthogonal test[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(8): 968-972. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-BJHK201108012.htm
    [18]
    曾元辰, 张卫华, 宋冬利. 基于车辆动力学和改进AGREE算法的高速列车稳定性综合可靠性分析[J]. 铁道机车车辆, 2018, 38(3): 10-16, 115. https://www.cnki.com.cn/Article/CJFDTOTAL-TDJC201803005.htm

    ZEHG Y C, ZHANG W H, SONG D L. Comprehensive reliability analysis of high-speed trains stability based on vehi-cle dynamic and improved AGREE algorithm[J]. Railway Locomotive and Car, 2018, 38(3): 10-16, 115. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-TDJC201803005.htm
    [19]
    姜久林, 徐宏海, 蒋兴佳, 等. 高速列车轴箱轴承稳态温度场影响因素分析[J]. 机械传动, 2019, 43(11): 121-126. https://www.cnki.com.cn/Article/CJFDTOTAL-JXCD201911022.htm

    JIANG J L, XU H H, JIANG X J, et al. Analysis of the influencing factor on steady-state temperature filed of axlebox bearing for high speed train[J]. Journal of Mechanical Transmission, 2019, 43(11): 121-126. (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXCD201911022.htm
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(13)  / Tables(4)

    Article Metrics

    Article views (445) PDF downloads(125) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return